Industrial Brushware website

Australia’s Largest Specialist Brush Manufacturer

  • HomeHome
  • About UsAbout us
  • Products
  • Contact UsContact Us
All types and varieties of brush making techniques All types and varieties of brush making techniques
All types and varieties of brush making techniques
All types and varieties of brush making techniques
  • Products

  • Specialist and Custom Made Brushes
  • Staple Set (Tufted) Roller Brushes
  • Spiral Wound Roller Brushes
  • Staple Set (Tufted) Strip and Block Brushes
  • Moulded Strip and Block Brushes
  • Rigid Back Strip Brushes
  • Flexible Back Strip Brushes
  • Road Sweeping Brooms
  • Power Sweeping Brushes
  • Rotary Disc Brushes / Pad Holders / Diamabrush
  • Conveyor Belt Cleaning Brushes
  • Fruit and Vegetable Brushes
  • Undervine and Orchard Brushes
  • Spray Suppressant Brushes
  • Bulldog Truck and Bus Washer
  • Heavy-Duty Truck Wash Poles and Accessories
  • Maxisweep Forklift Broom
  • Turf / Golf Brushes
  • Boot Cleaners
  • Escalator Brushes
  • General / Industrial & Road Maintenance Brooms

Staple Set (Tufted) Roller Brushes

These brushes are made by stapling knots of filament into pre drilled polyethylene, polypropylene or nylon which can vary in size cores from 50mm to 3000mm long lengths in 1 piece construction.

The most common brush patterns used are staggered rows, helix or chevron patterns with parallel & spiral rows also available. For light work it may be preferable to spread the pitch between fill holes to create a more flexible brush. For heavy work or where greater pressure is required, the pitch between fill holes can be closed up to give a stiffer brush. Alternatively fill materials can be made short for hard aggressive brushing or long for softer sweeping. A full range of filaments are available, all synthetic fibres from .005" (0.13mm) to 0.180" (3mm), natural fibres and all types of hair and wires.

Brush outside diameter can be vary depending on requirements from 40mm minimum to 600mm maximum overall brush diameter.

Basic guide on how to specify your punch roller brush

A) Brush Face = ...........................................................
B) Core Length = ...........................................................
C) Core O/Diam = ...........................................................
D) Tuft Hole Diam = ...........................................................
E) Brush O/Diam = ...........................................................
F) Filament Material ..............................................................
G) Pitch Along = ...........................................................
H) No of Rows Around = ...........................................................

Tuft hole sizes available: 3mm, 3.5mm, 4.5mm, 5mm, 6mm, 6.5mm, 7.5mm, 8mm, 8.5mm, 9.5mm, 10mm, 10.5mm, 12mm
 

   Ideal for:

  • Pharmaceutical
  • Printing and packaging
  • Food/beverage processing
  • Agricultural and turf
  • Conveyor cleaning
  • Industrial applications

Home | Products | About | Contact

Please click on the relevant State or Country website link as required:

Industrial Brushware Pty Ltd
(Victoria, N.S.W, QLD)
   Sunny Industrial Brushware Pty Ltd
   (West Australia, South Australia)
    Industrial Brushware NZ Pty Ltd
   (New Zealand, Pacific Islands)
   Industrial Brushware Asia Pte Ltd
   (Singapore, Indonesia, S.E Asia)
Copyright 2015 Sunny Industrial Brushware | All Rights Reserved